Infiray YM2.0 Multifunction Thermal Imager PIP Monocular Telescope Night Vision
J-YM Home Screen Display
No.
1 Azimuth compass Displays W, NW, N, NE, E, SE, S, and SW azimuths and angles.
2 Time Hours and minutes are displayed
3 Battery level
When the battery is fully charged, the color of the battery frame
changes from white to red when the battery is low
4 Reticle
By default, it is not displayed and can be enabled in the menu settings.
5 Pitch angle -90° ~ 90°
6 Roll angle -90° ~ 90°
7 PIP digital zoom
Can be displayed after being set in the menu, with the default mode
being full-screen digital zoom centered on reticle.
8 Image polarity
WhiteHot, BlackHot, Iron, Outline, Green and RedHot
9 Video capture
Video capture prompts icon
10 Image capture
Image capture prompts icon
11 Digital zoom amplification
Display digital zoom magnification
12 WIFI WIFI is on
The Reticle settings allow you to customize the Reticle Display, Reticle Type, Reticle Multiplier,
Reticle Color, and Reticle Movement to your preferences.
The Reticle Display toggles the reticle ON/OFF. When the reticle is visible, you can customize
its color and position to your preferences.
Reticle Type can be 5 types.
Reticle Multiplier can be set to ON or OFF. If ON is selected, the reticle changes with the electron zoom.
Reticle Color can be set to White, Black, Green, Red and Blue.
Reticle Move can be set to Default, Horizontal, or Vertical. If Default is selected, the position of
the reticle will be reset to the center of the image. If Horizontal or Vertical is selected, the reticle will
move horizontally or vertically. The move value ranges from –100 to 100, and each move value
represents a pixel with 5 archives.
